concrete crack repair backer rod

Inquiry Us Inquiry For More Information!Send Email To: [email protected]

Backer Rod for Expansion Joint Repair - SealGreen

Backer Rod for Expansion Joint and Crack Repair is a closed-cell backer rod; a soft and pliable filler designed to partially fill concrete expansion joints or cracks in concrete before applying joint sealer caulk. This material is non-absorbent and will allow you to control the depth of the concrete joint sealant.

Caulking Concrete Cracks | The Family Handyman

How to Caulk Wide Gaps

How to Caulk Concrete - The Family Handyman

Backer rod is the key. Insert backer rod into the gap, then run a bead of caulk over the top. For a smooth, even bead, tool the caulk with a plastic spoon. Use a backer rod with a diameter that’s 1/8 to 1/4 in. larger than the crack. Push the rod into the gap so the top is about 1/4 in. below the concrete …

How to Repair a Cracked Concrete Patio – Part 2

The crack will be stained to blend with the rest of the patio concrete after it cures. Patio Slab Edge Repair. The crack in the outside edge of the patio slab is patched using the same method with backer rod to fill the crack and QUIKRETE 8620 caulk.

Backer Rod - Crack Repair Made Easy - Tennis Universal Inc ...

Make crack repair easy with foam backer rod. Less messy than asphalt or concrete fillers, and no mess left on the court. Fill crack with backer rod then top off and level at the surface with ElastiCrack Crack Repair. Available in 5/8" for 1/2" width cracks, and 7/8" for 3/4" width cracks.

How to Repair a Cracked Concrete Patio

How to Repair a Cracked Concrete Patio ... QUIKRETE® Concrete Repair (No. 8620-10) and Backer Rod. The QUIKRETE 8620 caulk is suitable for cracks 1/8″ to 1/2″ wide. The caulk should be applied no more than about 3/8″ thick, using backer rod or sand to fill deep cracks.

How to Repair a Cracked Concrete Patio – Part 2

The crack will be stained to blend with the rest of the patio concrete after it cures. Patio Slab Edge Repair. The crack in the outside edge of the patio slab is patched using the same method with backer rod to fill the crack and QUIKRETE 8620 caulk.

Backer Rod - Crack Repair Made Easy - Tennis Universal Inc ...

Make crack repair easy with foam backer rod. Less messy than asphalt or concrete fillers, and no mess left on the court. Fill crack with backer rod then top off and level at the surface with ElastiCrack Crack Repair. Available in 5/8" for 1/2" width cracks, and 7/8" for 3/4" width cracks.

How to Repair a Cracked Concrete Driveway | Today's Homeowner

Click to view1:36

Fill the crack with concrete repair caulk, such as Polyurethane Concrete Crack Sealant from Quikrete. On cracks that are wider than 1/4” push foam backer rod into the crack with a screwdriver, so it’s 1/2” below the surface, then fill the crack with concrete repair …

Author: Danny Lipford

Driveway Repair Video - Ask the Builder

A preferred concrete sealer is the polyurethane concrete sealant. This product is very sticky and elastic. They will move with the movement of the driveway. In small cracks, just apply the sealer directly into the crack. If the crack is larger, you might have to buy the foam backer rod and place it first into the crack.

Repairing Cracks in Concrete - Home Repair Tutor

How big is the crack in your concrete? If it’s small you don’t need the backer rod. If the crack is large and just awkward like you described you can cut the foam backer rod to fit the spaces. It’s fine to cut the backer rod because you’re only using it to conserve on the crack filling product.

Repairing & Sealing Cracks in Concrete - QUIKRETE

Repairing & Sealing Cracks in Concrete. ... QUIKRETE Concrete Repair, QUIKRETE Gray Concrete Crack Seal or QUIKRETE Self-Leveling Polyurethane Sealant may be used. ... NOTE: for cracks or joints over ¼ inch, a Backer Rod should be placed in the crack before applying the sealant.

PC-Concrete™ – Protective Coating Company

PC-Concrete ™ Anchoring and Crack Filling Epoxy— is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hours at standard temperature.

Sealing Joints in a Concrete Slab - The Concrete Network

For sealers, use a bond breaker or backer rod in the bottom of the joint. This prevents the sealer from sagging into the joint and from adhering to the bottom of the joint, which allows the sealant to stretch on both the top and the bottom. A backer rod in the joint also keeps the sealer plug thinner, reducing the amount of sealant needed.

Backer Rod - Texas Refinery Corp

To install, simply force the BACKER ROD into the crack or joint, cutting to desired length with knife or scissors. Proper position of BACKER ROD in crack is about ½” to ¾” below surface. Then, use NU FLOOR FLEX-JOINT (for concrete) or POURABLE CRACK FILLER (for asphalt) over the BACKER ROD to complete the repair.

Repair Joints or Cracks in Driveways - Picture Guide

Filling moving cracks with ElastiPoxy will allow for the natural movement of concrete without causing new cracks. To prevent ElastiPoxy from running out, insert a foam backer rod or pour in some sand to partially fill the crack, leaving at least 1/2" for the filler.

How to fix concrete cracks on your driveway, sidewalk and ...

Any crack that’s deeper than 1/2” and wider than 1/4” needs Sashco’s Filler Rope™ or some other type of backer rod so the caulking will properly stretch, and so you use less caulking. 4 Apply the caulk

Shop QUIKRETE 32-oz Acrylic Concrete Patch at Lowes

If the crack is deeper than 1/4 in, use backer rod or sand to fill the crack to within 1/4 in of the surface One quart bottle will fill a 1/4 in x 1/2 in crack 38 feet long Specifications

Backer Rod – Application Tools from Watco

If you’re planning a floor repair project using a concrete crack filler or floor joint sealer, you’ll want to make sure you have a backer rod to use for filling your expansion joints before you apply your sealer. This will help keep your floor joints stable as you apply your repair product.

Asphalt Crack Foam Backer Rod For Sale | Asphalt ...

Asphalt crack backer rod is very easy to install and as the pictures to the right show, simply push the Rod material down into the asphalt crack so you have approximately 1/2" of depth from the rod to …